1 Item(s) Added to Cart
View CartLaser Power Meter consists of a display and a detector. The Laser Power Meters has been calibrated at a given wavelength before shipping.
Laser Power Meter using the amount of heat absorption measurement principle, thermal sensor measure the scope is very wide in spectral width and power, very high spatial uniformity, Without spot size, spot location or spot uneven impact. Can measure continuous wave laser output power; pulse repetition rate can also measure the average laser output power.
Small, easy portable Convenient to use with inset power supply Easy to read, high accuracy
Small, easy portable. Convenient to use with inset power supply. Easy to read, high accuracy.
To achieve better accuracy, the sensor area is decreased in the upgrade
Status instruction codes are added
For a convenient replacement of battery.
Another screw hold(M4) is added to attach to holder that further
decrease the deviation caused by crooked position while in operation.
Model | RM200B |
Type | Hand-held |
Measurement | 0~200W |
Mini Resolution | 0.1W |
Light Sensitive Area | φ19mm |
Wavelength | 10.64um |
Cooling Method | Nature-cooled |
Application | Co2 Laser tube |
Power Supp;y Requirement | 3v/3.6v 2032 Button Batteries |
Display | Four Numeric LCD display |
Usage:
1) Put power meter to testing area immediately after press the start button, and then waiting for the measurement.
2) The first sound means that measuring started; please continue to keep the smooth target surface during testing.
3) The second sound means measuring achieved. Please remove power meter immediately, do not stay for a long time.
4) The third sound means system power off automatically.
5) If after a long warning tone, the display shows"888.8", it means that the machine is breakdown, you could contact with the supplier, do not dismounting the machine arbitrarily.
* If the display shows "000.0", it means the temperature of the surface is too high or it is out of the measuring range. You can use the machine again after the temperature down.