1 Item(s) Added to Cart
View CartF5JY4TN4
New
The bench rotary dot pin marking device is a computer-controlled marking needle that moves according to a specific guide rail in the X, Y two-dimensional plane. The marking needle performs high-frequency impact motion under the action of compressed air, thereby engraving a mark with a certain depth on the your product surface.
HS-DP01-R bench pneumatic rotary engraver device features: can mark on flat surface and circle surface, a good engraving depth, direct marking output through the computer, marking result clear;
Model Number | HS-DP01-R |
Standard Marking Area | 120mm x 80mm (4.7in x 3.14in) |
Marking Speed | 30mm~40mm/s |
Impact Frequency | 300 times/s |
Marking Depth | 0.05mm~0.5mm (per material) |
Power Supply | AC 100V~240V 50HZ/60HZ |
Air Power Request | 0.2Mpa ~ 0.6Mpa |
Humidity | 0-90% (Non-condensing) |
Temperature | From 0 to 40 Centigrade Degree |
Marked Content | All English Characters, All Numbers, Variety of Graphics outline, Logos, Dot Matrix codes, Circle Letters, Serial Numbers, etc. |
Other Request | Need your side prepare air compressor and computer (Windows 98/XP/7) |
Pneumatic marking machine x 1
Rotary fixture with connect cable x 1
Controller connect cable x 1
USB cable x 1 (Your side need prepare a computer connect the machine to use)
Marking Pin x 3
Power adaptor with cable x 1
Air Regulator x 1 (Your side need prepare air compressor connect this part)
USB Disk (Thor X6 Software)